Building drying applications

The DryPanel® heats the masonry with infrared C radiation and makes the restoration of water damage easier and more efficient.

Drying partition walls

Attach the DryPanel® to the diffusion-tight side of the wall surface if a partition wall is not diffusion-open on both sides. This creates a pressure effect with which the moisture on the opposite, diffusion-open surface escapes into the room air.

With masonry open to diffusion on both sides (25 cm vertically perforated brick), the average drying time is 8-10 days.

Drying exterior walls

When drying exterior walls, a timed operation is necessary, provided that the outer side is open to diffusion. In this way, you avoid displacement of moisture into deeper layers of the wall. You will achieve the best results with switch-off cycles in which the displaced moisture can balance itself out again.

Note that significantly longer drying cycles are to be expected with this application.

Drying door and window reveals

For use in narrow niches and for door and window reveals, the compact DryPanel® models are particularly suitable. BT300 and BT200. In the case of overall rehabilitation, you can use it to treat potential problem areas specifically from day one. For sustainably shorter rehabilitation cycles.

Supplement for insulation drying

With insulation drying using the compressed air method, the compressed air blown in escapes again between the screed and the masonry. The moisture thus reaches the base area of the masonry. With the DryPanel® BT300 in the base mounting you counteract this effect.

The result: due to the local heating you shorten the total drying time enormously.

Flexible mounting options

Base mounting with feet

Fix the two feet to the frame structure easily and without tools using the knurled screws supplied.

Wall mounting

In secured areas, simply fasten the DryPanel® to the seam of the frame construction with a nail. For non-secured areas, a screw connection is made between DryPanel® and masonry using mounting brackets.

Mounting with telescopic rods

Fasten the knurled screws to the frame of the DryPanel® using mounting clamps. The mounting clamps can be connected to telescopic rods and are particularly gentle on walls. Optimal for smaller water damages.

Ceiling mounting

Establish a firm screw connection between DryPanel® and the ceiling by means of mounting brackets. Important: Ensure sufficient rear ventilation of the devices in the process.

Building drying with the DryPanel®

Tool free assembly

Setup and commissioning in just a few minutes.

Efficient drying

Silent, fast & comfortable - the room remains usable.

Easy dismantling

Quick disassembly - and off to the next use.

Infrared construction drying with WMT - The efficient solution for drying projects

The Infrared construction drying has proven to be one of the most advanced methods of Wall, ceiling and floor dehumidification established. With WMT Thermosystems GmbH you can rely on a powerful, energy-efficient and environmentally friendly technology that significantly speeds up the drying process while preventing material damage.

Why infrared construction drying?

Infrared heat penetrates deep into the building materials and achieves a Even and efficient moisture releasewithout consuming unnecessary energy. This technology works Targeted and heats only the damp spotsThis makes it much faster and more energy-efficient than traditional drying methods. In addition, the Gentle heat transfer the risk of Cracks or deformations minimized, which is particularly advantageous for sensitive materials such as plaster or wood.

Why work with WMT Thermosysteme GmbH?

WMT offers with DryPanel® and DryPanel® PRO market leader Infrared drying solutionswhich are renowned research institutes supported and with patented technologies are equipped. These devices are characterized by a Intelligent heating controlwhich optimizes energy consumption and only reheats when it is really necessary. In this way, we guarantee a particularly energy-saving and efficient Drying.

How does infrared construction drying work?

The infrared radiation penetrates deep into the material and heats the moisture in the walls or floors directly. This moisture is released into the air through evaporation without the ambient air itself being heated to any great extent. This Targeted drying energy is only used where it is really needed. This leads to shorter drying times and a lower power consumptioncompared to conventional methods such as dehumidifiers or fan heaters.

How can infrared construction drying be used?

Infrared construction dryers from WMT are versatile and are suitable for both new construction projects as well as for Renovations and water damage repair. They can be used in various phases of the drying process, in particular for:

Water damage restorationDrying of walls and floors after water infiltration.
New buildingsAccelerated drying of fresh plaster or screed.
RenovationsEfficient and fast drying of old building walls without the risk of damage to existing materials.

Combinations with other devices - Practical and useful applications

The Infrared construction drying can be perfectly combined with other drying technologies to increase efficiency and cover different application needs:

Dehumidifier: In particularly humid environments or areas with high levels of moisture, infrared technology with Dehumidifiers to quickly lower the humidity and support evaporation.
Air circulators: In order to remove the moisture released by the infrared heat more quickly, a Air circulator which keeps the air in motion and thus accelerates the drying process.
Fan heater: In areas with low temperatures or large surfaces, the combination of Fan heaters and infrared dryers ensure rapid drying.

These practical combinations offer the flexibility to select the optimum drying solution as required and thus achieve the best possible result in the shortest possible time.

Conclusion

The Infrared construction drying from WMT is a fast, energy-saving and material-friendly solution for your drying projects. With the DryPanel® series we offer you the most efficient method for moisture removal, which can be combined with other devices through the use of intelligent technologies and optional combinations. Perfectly tailored to your needs can be. Rely on WMT to optimize your Drying projects effectively and sustainably.

➡️ Find out more and request individual advice! office@wmt.at

Give us a call!

Find out more and request individual advice!

Click here